CHASSIS ELECTRICAL ± Multi-Center Display <High Grade>
54A-90
(4) If the F5 switch is pressed, all past error codes will be
cleared, and the screen will return to the diagnosis
recording screen. The Clear button will not be displayed
at this time.
(5) Press the F1 switch to return to the service mode initial
screen.
7. ERROR CODE TABLE
Error Code No. Error Details Detection Method (Reference) Reference
Page
1011 Ambient temperature sensor not connected
during diagnosis
Connection checking 54A-105
1021 Fuel gauge not connected during diagnosis Connection checking 54A-106
1031 GPS abnormality during diagnosis Connection checking 54A-106
1041 Engine-ECU not connected during diagnosis Connection checking 54A-106
1051 SWS not connected during diagnosis
(This error does not occur when correct car
type is set)
Connection checking 54A-106
1091 CD drive too hot during diagnosis Connection checking 54A-106
1092 ± 1096 CD drive abnormality during diagnosis Connection checking 54A-107
10A1, 10B1 Memory of navigation unit abnormality during
diagnosis
Connection checking 54A-107
20D1, 30D1 Vehicle speed pulse abnormality during
diagnosis
Sensor checking 54A-107
20E1, 20E2,
30E1, 30E2
Gyro level abnormality during diagnosis Sensor checking 54A-107
To Next Page
Loading...
