2. Error Conditions - Paper Jams
30 Morgana DocuMaster MFC - Service Manual
The outer paper guides
are not set correctly.
Set the outer paper
guides (see MFC User
Operating Instructions
Manual).
The air knife pressure is
not set correctly.
Set the air knife pressure
(see MFC User
Operating Instructions
Manual).
The static elimination
system is defective.
Do the static elimination
test
(see Section 4.4.2).
The sheets do not exit
the gathering area.
The Paper stop solenoid
is defective.
Replace the paper stop
solenoid (see Section
4.11.2).
The gathering area
sidelays are set to tight.
Adjust the gathering area
sidelays (see MFC User
Operating Instructions
Manual).
The online bookletmaker
sheet width is set
incorrectly.
Adjust the sheet width
(see MFC User
Operating Instructions
Manual).
The static elimination
system is defective.
Do the static elimination
test
(see Section 4.4.2).
Jam Location Problem Cause Solution
To Next Page
Loading...
