DCS Command System User’s Guide
Frequently Asked Questions
Can I use a Z-500 or Z-750 power supply to power the TIU through the Auxiliary
Power port?
Yes, but keep in mind that when the power supplies are plugged into the auxiliary power
port, they are only providing power to the TIU, they are not sending power out to the
track.
How can I update to the latest DCS software?
DCS updates are available online for free.
For more information please visit our website at:
http://www.protosound2.com/
When I update the DCS Software, do I have to have the most recent version in my
system prior to installing the upgrade?
No, each DCS software version is complete by itself. You can install version 2.2 on top
of version 2.0 with no ill effects.
What happens if you don’t hit the startup button prior to running a locomotive?
Nothing, the locomotive will simply move ahead without any locomotive sounds.
Can I use one transformer channel to power two different TIU channels?
Yes, but such a configuration will severely limit the available power for each of the chan-
nels. When possible, use separate transformer channels or transformers for each TIU
channel.
What happens if I wish to add two of the same locomotives into the remote?
DCS allows you to add multiple locomotives of the same type and roadname. The sys-
tem automatically creates separate ID numbers for each engine. The user can then
rename each engine (possibly with cab numbers or the owner’s name) to avoid any subse-
quent confusion.
If I turn off the smoke switch on my locomotive, does that turn off the smoke
feature when activated by the DCS remote?
No, the DCS system overrides the manual smoke unit switch on the locomotive.
127
To Next Page
Loading...
