DCS Command System User’s Guide
Menu Operations - Advanced
Edit Scene
Edit Accessories
1. The LCD shows the accessory list.
Scroll to the scene you want to edit and
press the thumbwheel.
2. The LCD will return you to the acces-
sory list to change which accessories are
in that scene. To add or delete an acces-
sory from the scene, scroll until the arrow
points to it and select the setting (On or
REM) you want.
3. When you have finished editing the
scene, press the softkey (S4) under
DONE.
Record/Playback
The Record/Playback feature allows you
to record up to 90 minutes or 500 button
presses (whichever is lower) of activity on
your layout that you can later replay exact-
ly with a single button push. With the
necessary equipment (e.g. AIU, operating
track section, etc.) you can program
equipment including multiple locomotive
operation, turnouts, operating cars, and
accessories to playback in response to a
button push.
REC (Record): When you are ready to
begin recording, make a careful note of all
equipment’s starting locations, press REC,
and begin operations. The screen returns
to the active engine screen and (R)
appears on the LCD to indicate that you
are recording a session.
94
Note: If you have more than one TIU, you
must select the TIU you are using before begin-
ning operations. Only actions of items associ-
ated with the TIU you select will be recorded.
To Next Page
Loading...
