DCS Command System User’s Guide
Menu Operations - Control
Brake/Boost
The Boost/Brake button can now func-
tion in two different ways, which you can
select from a menu. Select the “Stay”
option and your engine will remain at the
faster (Boost) or slower (Brake) speed
when you release the Boost/Brake button.
But select “Return” and your engine will
return to its previous speed when the
Boost/Brake button is released (as it does
with previous software versions).
1. Press MENU
2. Select CONTROL
3. Select BOOST/BRAKE
4. Press either STAY or RET. STAY holds
the engine speed at the indicated value
after releasing either the Boost or Brake
button. For example, if you have STAY
selected and you are currently going
15sMPH, pressing and holding the
BOOST button until you reach 25sMPH
then releasing the BOOST button will
make the engine run at 25sMPH. If you
had selected RET, the engine speed would
have gone back to 15sMPH (the speed
you started at when you pressed
Boost/Brake). This works the same way
with BRAKE.
55
Note: This setting is a global setting, so when
you make this setting it will affect all engines in
the DCS Remote
To Next Page
Loading...
