4 Handling the printer VJ-1624 OPERATION MANUAL
4-24
4. Place a razor blade on the media cut groove on the media guide, and cut the roll media.
CAUTION
• Pay attention to the following points when cutting roll media.
Mishandling the razor blade may cause a cut on your finger or hand.
• When you hold media, do not place your finger on the media cut groove.
• Move the razor blade along the media cut groove.
• The procedure for cutting the roll media is complete.
No. Name
1 Front cover
No. Name
1Media guide
2 Media cut groove
3 Razor blade
1
1
2
3
To Next Page
