Native Instruments Maschine MIKRO - Selecting a Product Category, a Product, a Bank, and a Sub-Bank on the; Controller

3.2.3.1 Selecting a Product Category, a Product, a Bank, and a Sub-Bank on the
Controller
On your controller in Browse mode:
1. Press F1 to select the FILTER page.
2. Press the Left/Right Arrow buttons to select the PRODUCT field.
3. Turn the Control encoder to select a product. Turn the Control encoder at full left to re-
move any particular selection (i.e. select all products).
4. If the selected product contains any banks, press the Right Arrow button to select the
BANK field, and turn the Control encoder to select a bank of the selected product. Turn
the Control encoder at full left to remove any particular selection (i.e. to select all banks
of the selected product).
5. If the selected bank contains any sub-banks, press the Right Arrow button to select the
SUB-BANK field, and turn the Control encoder to select a sub-bank of the selected bank.
Turn the Control encoder at full left to remove any particular selection (i.e. to select all
sub-banks of the selected bank).
Browser
Searching and Loading Files from the Library
MASCHINE MIKRO - Manual - 116