Native Instruments Maschine MIKRO - Preferences - Default Page

Setting Description
Inputs Clicking Inputs displays a list of all the available MIDI inputs of
your system. You can activate/deactivate each input by clicking the
fields in the Status column, which displays the current status of the
corresponding port.
Outputs Clicking Outputs displays a list of all the available MIDI outputs of
your system. You can activate/deactivate each output by clicking
the fields in the Status column, which displays the current status of
the corresponding port.
If you want MASCHINE to send other MIDI messages than MIDI Clock, in particular if
you want to control other MIDI-capable devices via the notes played in MASCHINE,
please refer to section ↑8.2.5, Sending MIDI from Sounds.
2.6.4 Preferences – Default Page
The Default page allows you to define a few default settings that will be used for every new
Project.
►
To display the Default page click the Default tab on the left of the Preferences panel.
Basic Concepts
Preferences
MASCHINE MIKRO - Manual - 71