Native Instruments Maschine MIKRO - 13.3.14.1 Setting the Loop Range in the Software

13.3.14.1 Setting the Loop Range in the Software
Set the start, end and position of the loop using the dedicated Loop range in the Timeline. The
value set in the Arrange Grid is used for Loop range increments and movement of the loop
range itself.
To adjust the Loop range using the software:
►
Drag the left or right end of the Loop marker to make it longer.
→
The Loop range is elongated.
To move the Loop using the software:
►
Click and drag the Loop range left or right.
→
The whole Loop range is moved.
Activating or Deactivating a Loop in the Software
To activate a Loop using the software:
►
Click the Loop button in the header to activate or deactivate the loop.
When the Loop is activated the Sections within the Loop range are repeated.
Working with the Arranger
Using Arranger View
MASCHINE MIKRO - Manual - 747