Element Description
NOTE COUNT
(Keyboard mode)
FIXED: The note count is fixed. The value set in the Note Count of
the CHORDS section will take precedent here.
EQUAL: The note count will be evenly distributed across the NOTE
RANGE.
GAUSS: The note count is likely to be distributed to the middle
section of the NOTE RANGE.
½ GAUSS: The note count more is likely to be distributed to the
middle and lower section of the NOTE RANGE.
NOTES
(Keyboard mode)
EQUAL: Notes will be evenly distributed across the Pattern in
accordance with the Step Grid.
GAUSS: Notes are more is likely to be distributed to the middle part
of the note range.
½ GAUSS: Notes are more likely to be distributed to the middle and
lower part of the Pattern in accordance with the Step Grid.
NOTE LENGTH FIXED: Notes will have the same length across the Pattern.
EQUAL: Note lengths will be evenly distributed across the Pattern.
GAUSS: Note lengths in the middle part of the pattern are more
likely to be shorter.
½ GAUSS: Note lengths in the middle to lower part of the pattern are
more likely to be shorter.
7.5 Recording and Editing Modulation
One of the really cool features of MASCHINE is the ability to modulate nearly all MASCHINE
parameters both on the controller and in the software in a very easy way.
In MASCHINE, modulation means the automatic change of MASCHINE parameters from an in-
ternal source (e.g., manual changes recorded via Auto-write…). Value changes are:
Working with Patterns
Recording and Editing Modulation
MASCHINE MIKRO - Manual - 364
To Next Page
Loading...
