Native Instruments Maschine MIKRO - Using Side-Chain

Hold SHIFT and NAV and press the pad corresponding to the desired Plug-in in order to mute/unmute it.
Use the same method to unmute the Plug-in:
►
To unmute a Plug-in, hold SHIFT + NAV and press the pad of the Plug-in slot again.
In most cases the first Plug-in slot contains an Instrument Plug-in (e.g., a Sampler). Be
careful: bypassing the slot will mute the whole Sound!
6.1.6 Using Side-Chain
Some Plug-ins provide side-chaining. This allows you to control their influence on the audio via
another audio signal sent to their secondary, side-chain input. This extra routing feature is de-
scribed in details in section ↑11.1.3, Using the Side-Chain Input.
Working with Plug-ins
Plug-in Overview
MASCHINE MIKRO - Manual - 275