Native Instruments Maschine MIKRO User Manual

14.3.2 Audio Editing Functions
In the Edit page, the Audio Toolbar provides various audio functions. These will be performed
on the selected region of the Sample, as defined by the Start and End parameters of the SE-
LECTION RANGE section (see ↑14.3.1, Using the Edit Page above).
►
To apply any audio function to the selected region in your Sample, click the desired icon
in the Audio Toolbar.
These audio editing functions are destructive, i.e. they modify the audio material in the
Sample. However, your original Sample will not be modified: For each audio function
that you perform, a new, distinct copy of the Sample will be saved!
The playback settings of the Sample (e.g., tune, amplitude envelope, etc.) can be ad-
justed on the Zone page. See section ↑14.5.4, Selecting and Editing Zones in the Map
View for more information.
The Audio Toolbar.
The Audio Toolbar provides following audio processing functions:
Command Description
TRUNCATE This deletes the part of the Sample that is outside of the selected
region.
NORM. (Normalize) This adjusts the level of the selected region to the maximum possible
value without clipping.
REVERSE This reverses the selected region of the Sample.
FADE IN This applies a fade in to the selected region of the Sample.
FADE OUT This applies a fade out to the selected region of the Sample.
Sampling and Sample Mapping
Editing a Sample
MASCHINE MIKRO - Manual - 781

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English