Native Instruments Maschine MIKRO User Manual

7.3 Recording Patterns with the Step Sequencer
If you are familiar with classic drum machines you may want to program your Pattern using the
step sequencer.
7.3.1 Step Mode Basics
On your controller the step sequencer is available via the Step mode. The Step mode allows you
to program the steps to be played by the focused Sound in the current Group.
Entering Step Mode on Your Controller
►
Press SHIFT + GROUP to switch your controller to Step mode.
In Step mode each pad of your controller represents one step of a 16-step sequence for the
focused Sound. The size of the steps depends on the current Step Grid settings. Lit pads indi-
cate events on the corresponding steps.
For more information on the Step Grid, see section ↑7.1.7, Adjusting the Step Grid and
the Nudge Grid.
This way it’s easy to quickly put some drums together.
Working with Patterns
Recording Patterns with the Step Sequencer
MASCHINE MIKRO - Manual - 336

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English