3.5.1 Attribute Editor Basics
The Attribute Editor is used in the following situations:
▪ At any time you can edit the tags and properties of user files already in the Library by se-
lecting them in the Result list of the LIBRARY pane and clicking the EDIT button at the
bottom right of the Browser. After you have finished editing click APPLY to apply your
changes to the selected files, or click the lit EDIT button again to cancel you changes and
close the Attribute Editor. See section ↑3.2, Searching and Loading Files from the Library
for more information on the LIBRARY pane.
▪ When importing folders to the MASCHINE Library from the Browser’s FILES pane, clicking
IMPORT at the bottom right of the Browser automatically opens the Attribute Editor so you
can tag the files being imported. After you have finished tagging click OK to import the
files to the Library and apply the selected tags, or click CANCEL to cancel the import. See
section ↑3.6, Loading and Importing Files from Your File System for more information on
the FILES pane.
The Attribute Editor (here showing the TYPES page).
The Attribute Editor affects the files selected in the Result list of the LIBRARY pane (see sec-
tion ↑3.2.8, Loading a File from the Result List) or the files within the folders selected for im-
port in the FILES pane (see section ↑3.6, Loading and Importing Files from Your File System).
The Attribute Editor is organized into various pages:
Browser
Editing the Files’ Tags and Properties
MASCHINE MIKRO - Manual - 144
To Next Page
Loading...
