in the pad grid and select Rename from the context menu.
The Scene name is highlighted and editable.
2. Type a name and press [Enter] on your computer keyboard to confirm (or press [Esc] to
cancel you change).
→
The Scene is renamed.
If you use MASCHINE as a plug-in, some hosts will utilize the [Enter] key, as it is map-
ped to some function of the host software. In this case, click anywhere else in the MA-
SCHINE plug-in window to confirm the name you have entered.
13.3.11 Clearing Sections
Clearing a Section allows you to remove the referenced Scene, leaving the Section empty.
Clearing Sections is only available from within the software.
While deleting a Section removes it entirely from your arrangement, clearing it only re-
moves its content — the Section stays in your arrangement, but empty. For information
on deleting Sections, see section ↑13.3.9, Removing Sections.
To clear a Section:
Working with the Arranger
Using Arranger View
MASCHINE MIKRO - Manual - 744
To Next Page
Loading...
