Native Instruments Maschine MIKRO User Manual

13.3.14.2 Setting the Loop Range Using the Controller
Set the start, end and position of the loop using the dedicated Loop page.
To set the loop range using MASCHINE MIKRO:
1. Press and hold SHIFT + RESTART to access the Loop screen.
2. Press F3 LOOP to activate the loop.
3. Press the right arrow below the display to select START.
4. Turn the Control encoder to set the start point of the loop.
5. Press the right arrow below the display to select LENGTH.
6. Turn the Control encoder to set the length of the loop.
→
The start and end points of the loop range are set.
►
Press the left arrow below the display to select POSITION and turn the Control encoder to
alter the position of the whole loop.
→
The position of the loop range is adjusted.
Activating or Deactivating a Loop Using MASCHINE MIKRO
To activate a Loop using the controller:
►
Press SHIFT + RESTART to activate or deactivate the loop.
→
When the loop is activated the Scenes within the Loop range are repeated. When the loop
is deactivated the Scenes in the loop will play once only.
13.4 Playing with Sections
MASCHINE provides you with various tools to precisely control which Section has to be played,
and when.
Working with the Arranger
Using Arranger View
MASCHINE MIKRO - Manual - 748

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English