→
The default plug-in preset is removed and the plug-in will load with its initialized settings
next time it is opened.
You can also use the Plug-in Manager in the Preferences panel to gain an overview of your de-
fault plug-in presets and also remove them if required.
Removing the default preset for a plug-in is a software only feature.
6.2 The Sampler Plug-in
The Sampler Plug-in allows you to play back any Sample in MASCHINE — including all
Groups, Sounds and Samples of the factory library. The Sampler comes with an extensive set
of parameters that offer various ways to further shape each of your Sounds individually. You
can tune, change basic dynamics and apply effects as well as different modulation options.
Many of these parameters can be modulated and automated! For more information, see
section ↑7.5, Recording and Editing Modulation and ↑8.2.3, Controlling Parameters via
MIDI and Host Automation, respectively.
In case MASCHINE cannot find the Sample(s) loaded in a Sampler Plug-in, a Missing
Sample dialog will appear and help you locate the missing Sample(s) again. Please refer
to section ↑3.7, Locating Missing Samples for more information.
This section describes the specific parameters found in the Sampler. For a general description
of the features and characteristics of Plug-ins (including the Sampler), please refer to section
↑6.1, Plug-in Overview.
We show here the Sampler parameters as they appear in the Control area of the Arrange
view. The Sampler also provides a custom panel in the Plug-in Strip of the Mix view.
This panel is described in section ↑9.4.3, Panel for the Sampler.
The Sampler parameters are organized in 6 pages:
▪ Page 1: Voice Settings / Engine: ↑6.2.1, Page 1: Voice Settings / Engine.
Working with Plug-ins
The Sampler Plug-in
MASCHINE MIKRO - Manual - 281
To Next Page
Loading...
Need help?
General
