12.4.5.3 Plate Reverb
This effect emulates a plate reverberator. Partly inspired by a legendary plate reverb system,
this efficient reverb effect can be used in numerous situations. Its controls make the Plate Re-
verb easy to use while still flexible and unique sounding. The Plate Reverb is the best choice if
a vintage metallic sound is desired. It is particularly good for vocals, but popular for other ma-
terial as well, such as snare drums.
The Plate Reverb in the Control area.
Parameter
Description
MAIN Section
Pre Delay Adjusts the time between the original signal and the early
reflections.
Decay Adjusts the damping of the plate, which directly affects the
decay time of the reverb.
EQ Section
Low Shelf Controls the low-frequency content in the reverberated signal.
High Damp Adjusts the damping of the high frequencies in the reverberated
signal.
OUTPUT Section
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
Effect Reference
Spatial and Reverb Effects
MASCHINE MIKRO - Manual - 659
To Next Page
Loading...
