Native Instruments Maschine MIKRO User Manual

▪ The Threshold and Gain faders (corresponding to the Threshold and Gain parameters of the
Main page in the Control area) provide level meters for visual monitoring of the input and
output levels. In particular, by comparing the input level with the position of the Threshold
fader, you can easily see you which parts of the signal will be compressed, and adjust the
Threshold fader accordingly.
▪ An additional GR level meter indicates the gain reduction currently applied by the Compres-
sor to the input signal.
12.1.2 Gate
The Gate cuts any part of the input signal which falls below the input threshold. This can be
used to rhythmically chop the signal and make it stutter or sound staccato.
If this effect is used in a Sound or a Group, it also provides a Side-Chain Input page (in the
Control area and on your controller).
The Gate panel in the Plug-in Strip.
Main Page
The Gate in the Control area: Main page.
Effect Reference
Dynamics
MASCHINE MIKRO - Manual - 618

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English