Parameter Description
Gain Adjusts the input level of the side-chain signal fed into the Plug-in.
FILTER Section
Filter Activates a filter on the side-chain input. This filter can be useful to
select only a specific frequency range of the side-chain signal to
control the Plug-in.
Center Freq Adjusts the center frequency of the filter.
Width Adjusts the bandwidth of the filter.
On your controller the outputs available in the SOURCE parameter are labeled as in the
display of the Source selector described above.
For more information on how to use the side-chain input, please refer to section
↑11.1.3, Using the Side-Chain Input.
The Compressor on the controller: SIDE-CHAIN INPUT page.
Level Meters in the Compressor Panel (Plug-in Strip)
In the Plug-in Strip, the Compressor panel offers a few extra features not available in the Con-
trol area:
Effect Reference
Dynamics
MASCHINE MIKRO - Manual - 617
To Next Page
Loading...
