12.4.5.1 Reverb Room
The Room mode is suited to drum and percussive sounds, and particularly sounds good when
used on snares. Modulate the Room Size, and Pre Delay parameters to create special effects.
The Reverb effect in the Plug-in Strip.
The Reverb in the Control area (Main page depicted).
Main Page
Element Description
ROOM Section
Mode Allows you to choose one of three basic modes of Reverb: Room,
Hall, and Plate (default: Room).
Reverb Time Adjusts the reverb decay time. Turn clockwise to increase decay.
Available values range can be adjusted in seconds from 0.5s to
20.2s (default: 1.0s).
Effect Reference
Spatial and Reverb Effects
MASCHINE MIKRO - Manual - 654
To Next Page
Loading...
