2. Click Auto Length in the menu.
→
Auto Length is enabled and the selected Section is automatically resized to fit the con-
tent of the Patterns within the assigned Scene. Any manual adjustments that were previ-
ously made are discarded.
To enable Auto Length for a Section using your controller:
1. Press SCENE to access the Section page.
2. Press the corresponding pad to select a Section.
3. Press SHIFT + F3 AUT LEN to enable Auto Length.
→
Auto Length is enabled and the selected Section is automatically resized to fit the con-
tent of the Patterns within the assigned Scene. Any manual adjustments previously made
are discarded.
13.3.14 Looping
Activate a Loop to repeatedly play a section of the Arrangement. Once a loop is activated the
Sections within the range of the Loop play until the loop is deactivated. You can use the range
to repeatedly play a particular part of a song. This can be good for composing, practicing a part
before recording, recording multiple takes, etc. The loop range is permanently visible, (even
when it is deactivate) and the range of the loop can be altered at any time using the left and
right end points.
Working with the Arranger
Using Arranger View
MASCHINE MIKRO - Manual - 746
To Next Page
Loading...
