The Hi-hat is an ideal candidate for making use of Choke groups! See ↑10.4.3, Hi-hat –
Memory for more details!
Adjusting the Choke Multiple Sounds with different Choke Values
►
Click the MULTI label next to Choke and select the desired value from the list to set all
selected Sounds to that same Choke group. This also applies to the Master/Slave setting
next to it.
Sound slots 1 to 4 are selected. If they have different Choke values, a MULTI label appears (left). When you click it and
select a new Choke from the list (middle), this new group is applied to all selected Sounds.
This is also true when adjusting the parameter from your controller.
To assign the selected pad(s) / Sound slot(s) to a Choke group and set its/their Choke mode on
your controller:
1. Hold the PAD MODE button to enter Pad Mode (or press PAD MODE + CONTROL to pin
it).
2. Use the Left/Right Arrow buttons to display the 1/6: CHOKE GROUP parameter.
3. Turn the Control encoder to select the desired Choke group 1–8 for that pad or choose
NONE (default setting) to remove the pad from its current Choke group.
4. Press the Right Arrow button to display the 2/6: CHOKE MODE parameter.
Playing on Your Controller
Adjusting Your Pads
MASCHINE MIKRO - Manual - 226
To Next Page
Loading...
