Muting a Group
►
To mute a Group, click the Group index (letter + number) on the left side of the Group in
the Arranger:
Muting a Group.
►
To unmute the Group, click the Group index again.
Mute and solo work in the same way:
The Solo mode on the controller.
1. Press and hold SOLO to enter Solo mode. You can also pin this mode to make it perma-
nent (see section ↑2.3.6, Pinning a Mode on Your Controller).
2. Solo Sounds by pressing their pads, and solo Groups of the current Group bank by press-
ing GROUP followed by the desired pads 9–16.
Playing on Your Controller
Playing Tools
MASCHINE MIKRO - Manual - 235
To Next Page
Loading...
