Native Instruments Maschine MIKRO User Manual

4. To change the output level of a Group, hold the GROUP button, press the pad 9–16 of the
desired Group (first navigate to its Group bank via the Left/Right Arrow buttons if necessa-
ry), and turn the Control encoder while holding GROUP.
5. To change the output level of an individual Sound, hold its pad (or hold SELECT + its pad
if pads are in Keyboard mode) and turn the Control encoder. In Keyboard mode you can
also press SELECT + the pad of the desired Sound, then hold any pad (i.e. any pitch of
that Sound) and turn the Control encoder.
6. Press CONTROL to leave Main mode and return to the default Control mode.
Press and turn the Control encoder to adjust the value in finer increments.
These shortcuts control the LEVEL parameter in the AUDIO page of the Master’s,
Group’s, and Sound’s Output properties, respectively. See section --- MISSING LINK ---
and --- MISSING LINK --- for a detailed description of these properties.
In the software you can also adjust the output level of the Master via the Master Volume slider
in the Header:
The Master Volume slider in the software’s Header.
To reset the output level of the Master to 0 dB, double-click the Master Volume slider.
Groove Shortcuts
1. Press MAIN to enter Main mode (the button must be lit).
2. Press F2 (SWING).
3. To change the groove of the Master (i.e. the overall output level of MASCHINE), simply
turn the Control encoder.
4. To change the groove of a Group, hold the GROUP button, press the pad 9–16 of the de-
sired Group (first navigate to its Group bank via the Left/Right Arrow buttons if necessary),
and turn the Control encoder while holding GROUP.
Playing on Your Controller
Playing Tools
MASCHINE MIKRO - Manual - 241

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English