Native Instruments Maschine MIKRO - Page 300

3. Click the Pages tab in the left part of the Assignment area:
→
The Pages tab lights up and the Pages pane appears on its right. You are now ready to
assign parameters to the Parameter pages.
The Pages tab can be clicked only for Native Instruments or External Plug-ins and for
the Macro properties. For all other Plug-ins and Channel properties, parameters and Pa-
rameter pages are not editable, and the Pages tab is grayed out and inactive. For more
information on the Macro properties and defining Macro Controls, please refer to ↑8.3,
Creating Custom Sets of Parameters with the Macro Controls.
When the Pages pane of the Assignment area is open, you also notice a few changes in the
Control area above:
1
2
3
4
6
5
7
The Control area with the Pages pane active in the Assignment area underneath.
Working with Plug-ins
Using Native Instruments and External Plug-ins
MASCHINE MIKRO - Manual - 300