Native Instruments Maschine MIKRO User Manual

If you want to select a Pattern already referenced by one or more Clips in the Arranger,
you can click any of these Clips to select and load the referenced Pattern in the Pattern
Editor. This way your arrangement won’t be modified.
Selecting a Pattern
►
To select a Pattern in the current Pattern bank, press PATTERN + the dim lit pad corre-
sponding to the cell of the desired Pattern on the right display.
→
Selecting a Pattern has the following consequences:
▪
This Pattern is displayed in the software’s Pattern Editor. You can then modify it both from
your controller and in the software.
▪ This Pattern is referenced by a Clip for the selected Group in the current Scene. This Clip
replaces any previous Clip for the Group in that Scene (see chapter ↑13.3, Using Arranger
View for more on this).
If you only want to quickly select another Pattern without using any from the editing
commands available, we recommend you to unpin the Pattern mode so you can quickly
use the shortcut PATTERN + pad to select the desired Pattern.
Selecting Patterns and Pattern Banks on Your Controller
Selecting a Pattern Bank
To select a Pattern located in another Pattern bank than the one selected, you fist need to se-
lect that other Pattern bank:
1. Press and hold PATTERN to enter Pattern mode.
2. Press SHIFT + Left/Right Arrow button to select the previous/next Pattern bank, respec-
tively.
If the last Pattern bank is selected and not empty, pressing SHIFT + Right Arrow button
will create a new, empty Pattern bank — see section ↑7.7.5, Creating and Deleting Pat-
tern Banks for more information.
Working with Patterns
Managing Patterns
MASCHINE MIKRO - Manual - 381

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English