3. On the right of the Pattern slot, click the little cross icon:
You can also right-click ([Ctrl]-click on Mac OS X) the Pattern slot or the corresponding
cell in the pad grid and select Delete from the context menu:
→
The Pattern is deleted.
If the Pattern was referenced by Clips in the Arranger, these Clips will be removed as
well!
Deleting Patterns on Your Controller
1. Press and hold PATTERN to enter Pattern mode.
2. Press SHIFT + Left/Right Arrow to select the desired Pattern bank.
3. Press the pad corresponding to the Pattern you want to delete.
4. Press F3 (DELETE).
→
The Pattern is deleted.
Alternate Method
1. Press and hold PATTERN to enter Pattern mode.
2. Press SHIFT + Left/Right Arrow to select the desired Pattern bank.
Working with Patterns
Managing Patterns
MASCHINE MIKRO - Manual - 385
To Next Page
Loading...
