Native Instruments Maschine MIKRO User Manual

→
The Pages tab lights up and the Pages pane appears on its right. You are now ready to
assign Macro Controls to parameters.
Once the Assignment area is open, when you switch to other Parameter pages the As-
signment area follows your selection: it always shows the assignments for the page cur-
rently displayed above.
The Pages tab can be clicked only for Plug-ins, External MIDI device Control Change as-
signments, and for Macro properties. For all other Plug-ins and Channel properties, pa-
rameters and Parameter pages are not editable, and the Pages tab is grayed out and in-
active. For more information on how to assign parameters of Native Instruments or Ex-
ternal Plug-ins to Parameter pages, please refer to ↑6.3.3, Setting Up Your Own Param-
eter Pages.
When the Pages pane of the Assignment area is open, you also notice a few changes in the
Control area above.
1
2
3
7
6
5
4
The Control area with Macro Properties displayed and the Pages pane active in the Assignment area underneath.
(1) Delete Page button (“x” symbol): Click the little “x” after a page name to delete this Parame-
ter page.
Audio Routing, Remote Control, and Macro Controls
Creating Custom Sets of Parameters with the Macro Controls
MASCHINE MIKRO - Manual - 459

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English