(4) AMP ENVELOPE section: Allows you to adjust the Type parameter and the envelope parame-
ters from the Pitch/Envelope page in the Control area. For more details, see section ↑6.2.2,
Page 2: Pitch / Envelope.
(5) SATURATION, LO FI, and FILTER sections: Allows you to adjust the parameters from the FX/
Filter page in the Control area. For more details, see section ↑6.2.3, Page 3: FX / Filter.
(6) TUNE section: Allows you to adjust the Tune parameter from the Pitch/Envelope page in the
Control area. For more details, see section ↑6.2.2, Page 2: Pitch / Envelope.
(7) PLAY and LOOP sections: Allow you to adjust the play range and loop settings of the selected
zone, respectively. These provide the same parameters as the PLAY RANGE and LOOP sections
found in the Zone page of the Sample Editor. For more details, see section ↑14, Sampling and
Sample Mapping.
Sampler – ZONE Pane
Controlling Your Mix
The Plug-in Strip
MASCHINE MIKRO - Manual - 489
To Next Page
Loading...
