The Filter panel in the Plug-in Strip.
Main Page
The Filter in the Control area: Main page.
Parameter Description
TYPE Section
Mode Here you can select between four different filter modes: LP (low-
pass), BP (band-pass), HP (high-pass), and Notch. Depending on
the mode selected, the following parameters vary as indicated.
FREQ Section
Cutoff Controls the cutoff frequency of the filter.
Resonance Controls the amount of resonance, i.e. the amount of amplification
near the cutoff frequency. It is not available with filter mode Notch.
MOD Section
Effect Reference
Filtering Effects
MASCHINE MIKRO - Manual - 634
To Next Page
Loading...
