FM in the Control area.
Parameter Description
FREQ Section
Rate This is for adjusting the speed of the FM modulation.
Split The Split control determines the extent to which the FM effect
is applied to high frequencies via a crossover. Turn to the right
to affect higher frequencies. It can be useful to eliminate noise
artifacts caused by FM of very high signals.
With high Split settings, the effect becomes more “gritty” and
crackling.
DEPTH Section
Contour Contour determines the extent to which the input volume affects
the intensity of the effect.
Amount Determines the amount of the FM effect.
The FM on the controller.
Effect Reference
Modulation Effects
MASCHINE MIKRO - Manual - 643
To Next Page
Loading...
