The Reverb panel in the Plug-in Strip.
The Reverb in the Control area.
Parameter Description
ROOM Section
Room This allows you to choose one of four basic characteristics of the
Reverb: General, Bright, Guitar, and Shatter.
Size Adjust the size of the virtual room here.
EQ Section
Low Low band EQ to cut or boost bass frequencies.
High High band EQ to cut or boost high frequencies.
POSITION Section
Pan This pans the dry signal. This is useful because the dry signal
can not be panned after the effect without panning the reverb
itself, which is unnatural.
Effect Reference
Spatial and Reverb Effects
MASCHINE MIKRO - Manual - 652
To Next Page
Loading...
