The Resochord panel in the Plug-in Strip.
The Resochord in the Control area.
Parameter Description
PITCH Section
Mode Here you can select between the two modes of the Resochord:
Chord and String. In Chord mode, the 6 combs are tuned
according to various chords. In String mode, the 6 combs are
centered around one frequency and can be spread for an
intense chorus-like effect. Depending on your selection the
other parameters in the Pitch area will change.
Spread (String mode) Allows you to define how big the difference in tuning is between
combs.
Style (Chord mode) You can select between different chord-styles such as minor or
major.
Chord (Chord mode) Here you can choose from different chords to be applied to your
audio signal.
Effect Reference
Delays
MASCHINE MIKRO - Manual - 668
To Next Page
Loading...
