When the right end marker of a Section is extended beyond the length of a Scene, the refer-
enced Patterns are repeated. When the right end marker of a Section is dragged so it is shorter
than the referenced Scene, only the part visible part of the Patterns are audible.
To lengthen a Section:
►
Click and drag the end marker of the Section to the right.
→
The Scene will be repeated if the adjustment is longer than the referenced Pattern.
To shorten a Section:
►
Click and drag the end marker of the Section to the left.
→
The Scene will be shortened, and if the adjustment is shorter than the referenced Pattern
a small Truncated Clip marker will appear on the right-hand side of the Section to indi-
cate that a part of the Scene is hidden. Only the visible part of the Scene will be audible
during playback.
When adjusting the size of a Section the following rules apply:
Working with the Arranger
Using Arranger View
MASCHINE MIKRO - Manual - 736
To Next Page
Loading...
