Section/Scene Slot MIDI Note Number Program Change Number
… … …
128 127 128
MIDI Note numbers: Host applications use various conventions to name MIDI notes. For
example, in MASCHINE, MIDI note number 0 is referred to as C-2 and MIDI note num-
ber 60 (middle C) as C3. Please refer to the documentation of your host to know which
convention is used.
Program Change numbers: Some host applications send Program Change numbers in the
range [0–127] instead of [1–128]. In that case, the PC number 0 will trigger Section
slot 1, PC 1 will trigger Section/Scene slot 2, etc. Please refer to the documentation of
your host to know in which range it sends Program Change numbers.
To enable or disable Section/Scene MIDI Change feature, do the following:
1. In the MASCHINE Header, click the cog wheel icon.
2. Click MIDI Change from the menu.
Working with the Arranger
Triggering Sections or Scenes via MIDI
MASCHINE MIKRO - Manual - 752
To Next Page
Loading...
