Native Instruments Maschine MIKRO - Page 755

2. Click the current Arrange Grid value to open the drop-down menu.
3. Select a new value for the Arrange Grid.
→
The selected Arrange Grid value is applied.
On your controller:
1. Press the GRID button to access the Grid page.
2. Press F2 to select ARNG (Arrange).
3. Press the left arrow to step through the menu to select VALUE.
4. Turn the Control encoder to select an Arrange Grid value.
→
The selected Arrange Grid value is applied.
To enable/disable the Arrange Grid
1. Press the right arrow to step through the menu to select ENABLE.
2. Turn the Control encoder to select ON or OFF.
→
The Arrange Grid is enabled or disabled.
Working with the Arranger
The Arrange Grid
MASCHINE MIKRO - Manual - 755