Parameter Description
SOURCE Select the type of source you want to record.
To record external audio signals connected to your audio interface,
select EXT. STER. (for stereo signals) or EXT. MONO (for mono
signals).
To record audio signals coming from MASCHINE itself, select
INTERNAL.
INPUT Choose between the available inputs. The available inputs depend on
the SOURCE setting (see above).
If SOURCE is set to EXT. STER. you can select from the four external
stereo inputs IN 1–4 available in MASCHINE.
If SOURCE is set to EXT. MONO you can select either of
MASCHINE’s eight external mono inputs: the left (“L”) or right (“R”)
channel of each input pair IN 1–4.
If SOURCE is set to INTERNAL you can select the output of any
available Group or the Master.
You can easily record the output of a particular Sound by setting SOURCE to INTER-
NAL, soloing this Sound and selecting its parent Group in the INPUT selector!
You can also set SOURCE to INTERNAL, choose as INPUT a Group with a drum kit
loaded, and record your live improvisations on the pads while playing this drum kit! You
will then have your own improvisations recorded as Samples, ready to be used, edited,
sliced, etc., as any other Samples in MASCHINE!
Choosing a Recording Mode
Once you have selected the desired source, choose a recording mode:
Sampling and Sample Mapping
Recording a Sample
MASCHINE MIKRO - Manual - 764
To Next Page
Loading...
