Parameter Description
PASTE This pastes the cut/copied region of the Sample, replacing the region
of the Sample currently selected.
DUPL (Duplicate) This duplicates the selected region of the Sample. The copy is
placed right after the original region.
STRCH (Stretch) This allows you to apply time stretching and/or pitch shifting to the
selected region of the Sample. See below for a detailed description.
Time Stretching / Pitch Shifting
When you select STRCH (using F1/F3), pressing F2 (STRCH) doesn’t directly perform the time
stretching / pitch shifting function. Instead, it allows you to adjust the parameters of the time
stretching / pitch shifting before you apply it to the selected region.
►
After you have selected STRCH and pressed F2 (STRCH), use the Left/Right Arrow but-
tons and the Control encoder to select and adjust the parameters. Pitch shifting and time
stretching can be applied independently.
Parameters for the Stretch function.
Following parameters are available:
Parameter
Description
STRETCH section
TUNE Adjusts the detuning (pitch shifting) to be applied (in semitones and
cents). Leave this value to 0.00 to leave the original pitch untouched.
Sampling and Sample Mapping
Editing a Sample
MASCHINE MIKRO - Manual - 786
To Next Page
Loading...
