Native Instruments Maschine MIKRO User Manual

Parameter Description
ATTACK (Knob 1) Adjusts how quickly the Sample/Slice reaches full volume after being
triggered.
DECAY (Knob 2) Adjusts how fast the Sample/Slice dies down.
Hold SHIFT when turning the Knobs to adjust the parameters in finer increments.
Page 5 – MAP Parameters
The MAP page contains the parameters defining the key and velocity ranges of the Zone.
Parameter Description
KEY LO (Lowest Key, Knob 1) Sets the lowest note (key) of the focused Zone.
KEY HI (Highest Key, Knob 2) Sets the highest note (key) of the focused Zone.
VEL LO (Lowest Velocity, Knob 3) Defines the lowest velocity of the focused Zone.
VEL HI (Highest Velocity, Knob 4) Defines the highest velocity of the focused Zone.
Editing Your Zones on the Controller
At the bottom of the display, the Zone settings allow you to adjust how each Zone should be
played back.
The Zone settings on the controller.
The various parameters always display the values for the focused Zone.
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE MIKRO - Manual - 828

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English