Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 297
— frame-relay
— lmi-type {ansi | itu | none | rev1}
— mode {dce | dte | bidir}
— n391dte intervals
—no n391dte
— n392dce threshold
—no n392dce
— n392dte threshold
—no n392dte
— n393dce count
—no n393dce
— n393dte count
—no n393dte
— t391dte keepalive
—no t391dte
— t392dce keepalive
—no t392dce
— idle-cycle-flag {flags | ones}
—no idle-cycle-flag
— idle-payload-fill {all-ones | pattern pattern}
—no idle-payload-fill
— mode access
— mtu mtu-bytes
—no mtu
— [no] ppp
— keepalive time-interval [dropcount drop-count]
— [no] shutdown
— character-length {6 | 7 | 8}
— clock-source slave
— control-lead {input | output}
— input
— c-i {high | low | end-to-end}
— monitor
— c-i {on | off}
— output
— i-c {high | low | end-to-end}
— data-position {F0-B5 | F0-B6}
— device-gender {dte | dce}
— device-mode {synchronous | asynchronous}
— duplex {half | full
}
— hold-time {[up hold-time-up] [down hold-time-down]}
—no hold-time
— loopback {bidir-b | bidir-e}
—no loopback
— multi-drop {disabled | slave | master}
— parity {odd | even | mark | space}
—no parity
— [no] report-alarm [hcmOof | hcmRai]
— s-bit-signaling {on | off}
— [no] shutdown
— speed {1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 56000 | 64k | 128k |
256k | 384k
| 512k | 640k | 768k | 896k | 1024k | 1152k | 1280k |
1408k | 1536k | 1664k | 1792k | 1920k}