Oce PlotWave 360 User Manual

1.
Open the 'Preferences' - 'Print job defaults' tab.
2.
Select the preset category you want to make a custom preset in and click on 'Edit', for
example 'Custom Image preset for print'.
3.
Fill in a name and description that will be used for the preset on the user panel.
4.
Select the settings you want to use for the custom preset, for example choose to set 'Print
quality' to 'Poster'.
5.
Click 'Ok' to confirm, or 'Cancel' to reject your entries. Your custom preset is now visible,
and can be selected.
Result
Your settings are presented as presets on the user panel. The preset used as default is
highlighted in the list.
Chapter 3 - Define your Workflow with Océ Express WebTools146
Set the print presets

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches