Oce PlotWave 360 User Manual

Print a demo print
When to do
You can print a demo print to check if the printer works correctly.
How to print a demo print
On the multi-touch user panel:
1.
Tap the 'System' thumbnail. A window opens.
2.
In the 'Setup' list in the bottom right corner of the display, select 'Test prints'. A wizard
opens.
3.
Select 'Demo print'.
4.
Tap Ok.
A demo print is printed.
Chapter 8 - Support356
Print a demo print

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches