Oce PlotWave 360 User Manual

Configure the 'User panel time-out'
Introduction
The printer user panel can automatically return to the Home screen. When you disable
this setting, the user panel display does not return to the Home screen automatically.
When to do
Enable the setting and define a suitable time-out period that does not interfere with the
print productivity.
How to configure the 'User panel time-out'
In Océ Express WebTools:
1.
Open the 'Preferences' - 'System properties' tab.
2.
Click 'Edit' in the 'Printer properties' section, or click on the 'User panel time-out' setting.
3.
When you enable the setting, you must enter a time period as well. If you choose to disable
the setting, the time-out period will not be adjustable.
4.
Click 'Ok' to confirm, or 'Cancel' to reject your entries.
Chapter 3 - Define your Workflow with Océ Express WebTools158
Configure the 'User panel time-out'

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches