Oce PlotWave 360 User Manual

Extended Print Jobs - Advanced Settings
Advanced settings for print jobs
Introduction
When you tap the 'Print' tile on the multi-touch user panel, you can make your own
settings.
Apart from the preset tiles, you can select the advanced settings under 'All settings'. These
settings are used for extended print jobs. The following table gives an overview and a
short description of the available settings on the printer. You can find a detailed description
of each setting in Océ Express WebTools.
Preset category: 'Media'
#
FunctionSettings valuesSetting
The type of media you use.Any type
List of media types
'Media type'
The size of media you use.Any size
List of media sizes
'Media size'
Define the media feed to copy or print
on. When you select 'Auto' the printer
automatically selects the media roll.
'Automatic'
'Roll 1' (description of
media type and media
size loaded on roll 1)
'Roll 2' (description of
media type and media
size loaded on roll 2)
'Manual'
'Media source'
Chapter 4 - Use the Printing System214
Advanced settings for print jobs

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches