Oce PlotWave 360 User Manual

Preset category: 'Layout'
#
FunctionSettings valuesSetting
When set to 'Synchro', the print is cut
depended of the image.
When set to 'Standard', the print is cut
to a standard media size.
When set to 'Custom', you must enter
the sizes manually.
'Cut method':
•
'Synchro'
•
'Standard'
•
'Custom'
'Cut size'
Adds a blank strip at the beginning of the
output.
From 0 to 400 mm, or 0 to 16 inches.
'Add a leading strip'
Adds a blank strip at the end of the out-
put.
From 0 to 400 mm, or 0 to 16 inches.
'Add a trailing strip'
Rotates the image counter-clockwise.
Select 'Automatic media saving' to use
the media in the most efficient way.
'Automatic media sav-
ing'
'0°'
'90°'
'180°'
'270°'
'Rotation'
Chapter 4 - Use the Printing System 215
Advanced settings for print jobs

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches