Oce PlotWave 360 User Manual

Change the media type and media size
Introduction
When you load a new type of media, the system automatically detects the new media and
can ask you to enter the correct media type and size. When the media type or size defined
on the system, are not correct you can change these settings.
Illustration
Define the media type and size when you load new media
On the multi-touch user panel:
1.
A window opens when you load new media.
2.
Choose the correct media type from the list and click Ok.
3.
Choose the correct media size from the list and click Ok.
The printer places the string, with the right media name in the printer image, under the
System menu.
Chapter 5 - Maintain the Printing System 309
Change the media type and media size

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches