Oce PlotWave 360 User Manual

Move the Printing System
Switch off the printing system
Introduction
When you want to switch off the printing system completely, you have to take a few
steps.
1.
Use the on / off button at the front of the printer to switch the printing system off. The
lighted button starts to blink.
Note:
You can also use the 'Shut down' button in Océ Express WebTools.
Attention:
Wait until the on / off button stops blinking.
Chapter 5 - Maintain the Printing System280
Switch off the printing system

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches