Oce PlotWave 360 User Manual

Extended Scan Jobs - Locations and
Presets
Scan presets on the user panel
Introduction
When you do not make different settings in Océ Express WebTools, the printer uses the
default presets for print, copy, and scan jobs.
Below the presets you can use to change the settings for scan jobs on the multi-touch
user panel are listed. The scan presets are divided in three categories: 'File type', 'File size',
'Image'.
Note:
For more information on how to change the preset settings, see ‘Set the scan presets’ on
page 143.
Scan presets on the user panel
#
'Image''File size''File type'
'CAD colour''200 dpi'' TIFF '
'CAD greyscale''300 dpi'' PDF '
Colour to greyscale'400 dpi'' JPEG '
'Photo''Custom''Custom'
'Custom'
Chapter 4 - Use the Printing System252
Scan presets on the user panel

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches