Oce PlotWave 360 User Manual

Replace the residual toner container
Introduction
When you refill the toner, you also need to replace the residual toner container.
Attention:
Do not replace the container during the printing process. You can replace the container
when the printer is on.
How to replace the residual toner container
1.
Open the residual toner compartment.
Chapter 5 - Maintain the Printing System 313
Replace the residual toner container

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches